Features:
This system is a two router system for cutting a 45° bevel/mortise into a counter top and then cutting a feature strip to fill the mortise. The feature strip can be of the same laminate as the top, a contrasting laminate a wood veneer, etc. The small router has fine tuning adjustments so the feature strip fits tightly in the groove. The larger router comes set up with a 3/8" carbide bit for doing the 3/8" bevel. Once the bevel is cut and the strip is cut, glue is applied in the groove and the strip is inserted into the groove completing the job. There is no surface trimming to be done after the feature strip is inserted.
Inside corners can also be made by making a molding and mitering it into the corner.
Standard Equipment:
|