Where one blade must do almost everything - ripping and crosscutting hardwood and softwood, cutting plywood - this blade is a good choice. It is in the traditional combination-blade configuration, with a flat-top tooth and 4 alternate top bevel teeth in groupings of five. The large gullets at teh raker tooth allow deep cuts with improved chip ejection.
| Tool No. |
DO |
Teeth |
Grind |
'B'Kerf |
'C'Plate |
Bore |
| Inch |
20mm |
Inch |
Inches |
| 684004 |
8 |
200 |
40 |
4&1 |
.126 |
.087 |
5/8 |
| 694004 |
9 |
230 |
40 |
4&1 |
.126 |
.087 |
5/8 |
| 610504 |
10 |
250 |
50 |
4&1 |
.135 |
.095 |
5/8 |
| 612604 |
12 |
300 |
60 |
4&1 |
.150 |
.110 |
1 |
| 614704 |
14 |
350 |
70 |
4&1 |
.150 |
.110 |
1 |
| 616804 |
16 |
400 |
80 |
4&1 |
.158 |
.118 |
1 |
