Cart is empty
Double-Face Melamine & Laminate
Double-Face Melamine & Laminate
Designed specifically to cut melamine, this blade does just that without chipping on the top or bottom edges. (Your table saw must be properly tuned, of course.) the special "high-ATB" grind (with 25° bevels) slices cleanly through fragile surface coatings like melamine and laminate. Coupled with a thick, heavy-duty plate for added stability, this blade produces extremely smooth cuts. It is easily resharpened.
| Tool No. | OD | Teeth | Grind | 'B' Kerf |
'C' Plate |
Bore | Pin Hole | |
|---|---|---|---|---|---|---|---|---|
| Inch | mm | Inch | Inch | |||||
| MB86400 | 8 | 200 | 64 | H-ATB | .110 | .087 | 5/8 | - |
| *MB2200T420 | - | 220 | 42 | H-ATB | .110 | .087 | 30mm | 2/7/42 |
| MB10800 | 10 | 250 | 80 | H-ATB | .126 | .102 | 5/8 | - |
| MB10800-30 | 10 | 250 | 80 | H-ATB | .126 | .102 | 30mm | 2/7/42 & 2/10/60 |
| MB12960 | 12 | 300 | 96 | H-ATB | .126 | .102 | 1 | - |
| MB12960-30 | 12 | 300 | 96 | H-ATB | .126 | .102 | 30mm | 2/7/42 & 2/10/60 |
| MB14108 | 14 | 350 | 108 | H-ATB | .126 | .102 | 1 | - |
| MB14108-30 | 14 | 350 | 108 | H-ATB | .126 | .102 | 30mm | 2/7/42 & 2/10/60 |
| MB16120 | 16 | 400 | 120 | H-ATB | .150 | .126 | 1 | - |
*For 220mm Holz-Her Panel Saws
Note: The 8" blade can be used on vertical type panel saws such as 'Safety Speed Cut', etc.
Tell a friend
|
