The portable FLEX core drilling unit with anchor or vacuum attachmentThe
17.6 AMP strong, three speed drill BSW 2123 C combined with the BD 160
stationary drill stand - this is a light weight, mobile unit for one person
operation. The drill bits are cooled directly by the central water
supply. The seals can be replaced quickly from the outside. The
combination shaft with two connections, G 1/2" inside, 1 1/4" UNC
outside, makes the connection of standard drill bits possible. The water
collector ring prevents water damage.
Features:
- Mechanical 3-speed gearbox: with optimum speed graduation
- Safety clutch: offers protection if the core drill is jammed
- Bubble level: for accurate unit alignment
- Quick-release core bit ring: 1 1/4" UNC
- Slanted drilling: up to 45°
- Central water feed
- Hand crank: attaches to both sides
- Quality shut-off carbon brushes: protects the motor against damage
- Drill bit connections: combination shaft with two connections, G
1/2" (internal), 1 1/4" UNC (external)
- Effective drill bit length: max. 17"
- Mounting for water collection ring: for drill diameter up to
5-1/8"
Specifications:
- Power Input: 17.6 AMP
- Power Output: 1,400 Watts
- Speed, under load: 1st gear - 450 RPM / 2nd gear - 1,080 RPM /
3rd gear - 2,100 RPM
- Tool fixture: G 1/2" (internal), 1 1/4" UNC
(external)
- Diamond drill bit diam.: 1st gear - 3" to 6" / 2nd gear -
1-3/8" to 3" / 3rd gear - 1/2" to 1-3/8"
- Surface area occupied by stand: 17" x 8"
- Weight (complete unit): 39.6 lbs
- Weight (machine): 18.7 lbs
Standard Equipment:
- 1 open-ended wrench 13 mm
- 1 open-ended wrench 19 mm
- 1 open-ended wrench 36 mm
- 1 drills stand BD 160